F8010 Səviyyəyə Nəzarət üçün Modulyasiya edən Float Nəzarət Klapanı
Mənşə yeri: | ÇİN |
Marka adı: | WALTER / OEM Brend |
Model nömrəsi: | F8010 |
Sertifikatlaşdırma: | WRAS |
E-poçt: [e-poçt qorunur]
təsvir
Minimum Sipariş Sayısı: | 2 PCS |
Qiymət: | 298 USD |
Qablaşdırma məlumatları: | TAXTA QUTU |
Çatdırılma vaxtı: | 3 WEEKS |
Ödəniş şərtləri: | T / T, L / C, Western Union |
Bacarığı təchizatı: | 500 PCS / AY |
WALTER brand F8010 Float Control Valve is Modulating type valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point.
The float pilot is remotely installed inside of reservoir, or integrally installed with main valve for size less than 4 inch.
Thanks to a needle valve on the chamber the response time can be adjusted, to prevent water hammer effects during the closing phase, the valve is designed to reduce head loss, throttling noise and cavitation damage also.
Xüsusiyyətləri:
1.Uzun ömür və etibarlılıq üçün avtomatik əməliyyat, üst və oturacaq halqası ilə idarə olunan gövdə və neylon gücləndirilmiş diafraqma qurğusu.
2.Xəttdə xidmət edilə bilər, Əsas xəttdən çıxarılmadan asan texniki xidmət.
3.Korroziyaya davamlı paslanmayan polad oturacaq və disk tutma halqası.
4.Bir çox müxtəlif proqramlarda konfiqurasiya üçün mövcud olan müxtəlif pilotlar və aksesuarlar.
5.Xüsusi V-Port seçimdir, zəhmət olmasa zavodla məsləhətləşin.
Texniki məlumat:
1.Dizayn: EN1074-5, BS EN1567
2.Üz-üzə: BS EN558-1, ISO 5752 Series 1
3.Flanşlar: BS4504, BS EN1092-2 PN10/16/25; ANSI 125/150/300
4.Ölçü Aralığı: DN50 – 600
5.Təzyiq dərəcəsi: 1.0 Mpa; 1.6 Mpa; 2.5 Mpa
6.Temperatur: -10°C ~ 80°C
7.Örtük: Füzyonla bağlanmış epoksi qatran.
Tez məlumat
1,Level Control Valve, Remote Control Valve, Constant level automatic control valve, hydraulic control valve, Float control valve, control valve
2,WALTER Model F8010 Float Control Valve Necessary to maintain and ensure the water level to a pre-set value, with valve’s opening proportional to water consumption.
3,F8010, DN50-DN600, PN10, PN16, PN25
Applications
1.For break pressure tanks and when a proportional level control is needed within the pilot’s range.
2.For level control on gravity fed pipelines.
3.For small tank and in need of maintaining a constant level with a continuous modulating.
Xüsusiyyətlər
Xeyr | Partiyanın adı | Material | standart |
1 | Bodi | Elastik dəmir | GJS500-7 |
2 | Oturacaq | Paslanmaz polad | AISI 304/316 |
3 | O-ring | Rezin | NBR |
4 | O-ring | Rezin | NBR |
5 | Bolt | Paslanmaz polad | AISI 304/316 |
6 | Şayba | Paslanmaz polad | AISI 304/316 |
7 | Papaq | Elastik dəmir | GJS500-7 |
8 | Kol | Bürünc | C61900 |
9 | Yaz | Paslanmaz polad | AISI 304/316 |
10 | Çuxur | Paslanmaz polad | AISI 304 |
11 | Diafraqma | Neylon Gücləndirilmiş Kauçuk | EPDM + Neylon Parça |
12 | Sabitləşdirici | Elastik dəmir | GJS500-7 |
13 | Disk Tutucu | Elastik dəmir | GJS500-7 |
14 | Seal | Rezin | EPDM |
15 | Oturacaq saxlayıcı | Paslanmaz polad | AISI 304/316 |
16 | səs | Paslanmaz polad | AISI 304/316 |
17 | Ştepsel | Paslanmaz polad | AISI 304/316 |
18 | vint | Paslanmaz polad | AISI 304/316 |
19 | Ştepsel | Paslanmaz polad | AISI 304/316 |
20 | Şayba | Paslanmaz polad | AISI 304/316 |
boy | L | D | K | N-∅d | ∅B | H | ||||||||
PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | |||
DN50 | 230 | 165 | 165 | 165 | 125 | 125 | 125 | 4-∅19 | 4-∅19 | 4-∅19 | 99 | 99 | 99 | 177 |
DN65 | 290 | 185 | 185 | 185 | 145 | 145 | 145 | 4-∅19 | 4-∅19 | 8-∅19 | 118 | 118 | 118 | 202 |
DN80 | 310 | 200 | 200 | 200 | 160 | 160 | 160 | 8-∅19 | 8-∅19 | 8-∅19 | 132 | 132 | 132 | 219 |
DN100 | 350 | 220 | 220 | 235 | 180 | 180 | 190 | 8-∅19 | 8-∅19 | 8-∅23 | 156 | 156 | 156 | 243 |
DN125 | 400 | 250 | 250 | 270 | 210 | 210 | 220 | 8-∅19 | 8-∅19 | 8-∅28 | 156 | 156 | 156 | 243 |
DN150 | 480 | 285 | 285 | 300 | 240 | 240 | 250 | 8-∅23 | 8-∅23 | 8-∅28 | 211 | 211 | 211 | 333 |
DN200 | 600 | 340 | 340 | 360 | 295 | 295 | 310 | 8-∅23 | 12-∅23 | 12-∅28 | 266 | 266 | 274 | 428 |
DN250 | 730 | 405 | 405 | 425 | 350 | 355 | 370 | 12-∅23 | 12-∅28 | 12-∅31 | 319 | 319 | 330 | 478 |
DN300 | 850 | 460 | 460 | 485 | 400 | 410 | 430 | 12-∅23 | 12-∅28 | 16-∅31 | 370 | 370 | 389 | 538 |
DN350 | 980 | 520 | 520 | 555 | 460 | 470 | 490 | 16-∅23 | 16-∅28 | 16-∅34 | 429 | 429 | 448 | 550 |