Bütün Kateqoriyalar

Şirkət xəbərləri

Ana səhifə>media>Şirkət xəbərləri

Su təmizləyici sistemdə süzgəcin seçilməsi prinsipi

Vaxt: 2022-11-10 Oxunub: 20

What is the strainer selection related to?

The strainer is a small equipment to remove a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the strainer cartridge with a strainer screen of a certain size, its impurities are blocked, and the clean filtrate is discharged from the strainer outlet. When cleaning is required, just take out the removable strainer cartridge and reload it after treatment.

1. Diameter of strainer inlet and outlet:

In principle, the inlet and outlet diameter of the strainer shall not be smaller than the inlet diameter of the matching pump, which is generally consistent with the inlet pipe diameter.

2. Nominal pressure selection:

The pressure rating of the strainer shall be determined according to the highest possible pressure of the strainer line.

3. Delik nömrəsinin seçimi:

The selection of strainer hole mesh mainly considers the particle size of impurities to be intercepted, which is determined according to the process requirements of the medium process. The particle size that can be intercepted by various specifications of screen can be found in the following table "Screen Specifications".

4. strainer material:

The material of the strainer is generally the same as that of the connected process pipe. For different service conditions, the strainer made of cast iron, carbon steel, low alloy steel or stainless steel can be considered.

5. Calculation of strainer resistance loss

The pressure loss of water strainer is 0.52~1.2kpa under the rated flow rate generally calculated.